Tips for Inspecting a Garage Door

It’s easy to overlook the garage door and it can pose a safety hazard, but you can maintain it yourself with some simple inspection tools and some common household items. Listed below are some tips for evaluating a garage door.

To start, close the door and check for the manual release handle, which is a rope or cord that detaches the garage door from its operator. If the door is still stuck half-open, you may need to call a professional garage door service. For advice on Garage Doors Bristol, visit a site like Up and Over Doors Ltd

Image credit

Broken springs: If your garage door is sticking half-way or is not opening fully, it may be due to a problem with the torsion spring. In this case, you should check for damage to any major parts of the hardware. In addition, if one side of the door appears visually lower than the other, it may be a problem with the spring system. This problem could be further complicated by continued operation.

When a torsion spring breaks, it stays in the track and can make a loud noise. Likewise, a broken extension spring can break and fly off the garage door. If this happens, it could cause injury or damage. Broken springs can also cause the garage door to warp, causing it to be unstable and unable to operate correctly. Also, check the horizontal track, which supports the garage door when it’s fully open.

Spring and hinges: Check the springs and rollers for wear and tear. Torsion springs are mounted on the shaft, while extension springs are found next to the horizontal tracks. Make sure they’re free of dents.

Image credit

Safety eyes: These safety eyes are located on both sides of the garage door track. Both of these sensors should have an LED light on them. Make sure they’re pointing in the same direction. If they’re not, you can contact a professional garage door repair person for assistance. If the lights are flickering, it’s a sign that something needs to be adjusted. However, if the light is still on, it’s probably a wiring problem.

Steel rollers are under a lot of tension and need to be checked closely. If you notice cracks or fraying on these parts, you should call a garage door repair service. Otherwise, you might be putting yourself at risk for injury. In addition to inspecting the springs, you should also check for dents and corrosion.

Leave a Reply

Your email address will not be published. Required fields are marked *